Printronix H-SERIES P7000 - Manual (Page 30)

30
Chapter 3 Operational Procedures
Figure 15. Adjusting the Platen Lever
28. Lower the platen lever. Set it to match the paper thickness. (The A-B-C
scale corresponds approximately to 1-, 3-, and 6-part paper thickness.
Adjust until you have the desired print quality.)
29. Lower the platen lever to set it to the paper thickness indicated by the
auto platen stop.
30. Press ONLINE/CLEAR to clear any fault messages (such as “LOAD
PAPER”) from the LCD.
31. Press SET TOF. The top-of-form you have set moves down to the print
position. If there is data in the buffer, the paper moves forward to the last
print position on the next page.
32. Press ONLINE/CLEAR and close the printer cover.
7cribo
pn
Platen Lever
Vertical Position Knob
Platen Stop
Knob
A
A
Platen Stop
Paper Thickness
Indicator