Printronix H-SERIES P7000 - Manual (Page 88)

88
Chapter 4 NETWORK SETUP MENU
WLAN KERBEROS
Kerberos Enable
• Disable (the default). Disables Kerberos authentication in the wireless
network interface.
• Enable. Enables Kerberos authentication in the wireless network
interface.
Kerb. Passwd
• Kerb. Pwd (01-15). The first 15 characters of the Kerberos password
(maximum number of characters is 40).
• Kerb. Pwd (16-30). Characters 16 to 30 of the Kerberos password
(maximum number of characters is 40).
• Kerb. Pwd (31-40). Characters 31 to 40 of the Kerberos password
(maximum number of characters is 40).
Reset Kerb. Pwd
Resets the Kerberos password to an empty string.
KDC Port Number
KDC (Key Distribution Center) port number is the 2-byte UDP/TCP port used
for Kerberos Communication.
The range is 0-65535, and the factory default is 88.
WLAN
Kerberos 1
(from page 76)
Kerberos
Enable
Disable*
Enable
Kerb.
Passwd
Kerb Pwd(01-15)
Kerb Pwd (16-30)
Kerb Pwd (31-40)
Reset
Kerb. Pwd
Ticket Lifetime
Tckt Lifetime Units
Seconds*
Minutes
Hours
Days
Tckt Lifetime (SEC)
43200*
* = Factory Default
1 = Only if a Symbol radio card is installed.
KDC Port
Number
88*
0-65535
Clock Skew
Clock Skew Units
Seconds*
Minutes
Clock Skew (Sec)
300*
Renew
Lifetime
Renew Life Units
Seconds*
Minutes
Hours
Days
Renew Life (SEC)
0*