Printronix H-SERIES P7000 - Manual (Page 60)

60
Chapter 4 HOST INTERFACE
Auto Switching Submenu
Auto Switching
Gives the printer the ability to handle multiple data streams sequentially. With
Auto Switching, the printer can service hosts attached to the serial, parallel,
coax and twinax ports as if they were the only interface connected.
For example, if the host computer sends one print job to the
RS-232 serial port and a separate print job to the IEEE 1284 parallel port, the
printer's Auto Switching is able to handle both jobs, in the order they were
received. The user does not have to reconfigure the selected interface
between jobs.
Auto Switching
(from page 59)
Parallel
Hotport Serial
Hotport
Port Type
Centronics*
(see page 62 for options)
Dataproducts
(see page 64 for options)
IEEE 1284
(see page 73 for options)
Disable
E-Net Adapter
(see page 74 for options)
Trickle Time
1/4 sec*
1/2 sec
1 sec
2 sec
4 sec
8 sec
16 sec
Off
Timeout
10 sec.*
(10-60)
Report Status
Disable*
Enable
Switch Out On
Data Timeout*
Session Close
Port Type
RS 232*
RS 422
Disable
Trickle Time
1/4 sec*
1/2 sec
1 sec
2 sec
4 sec
8 sec
16 sec
Off
Timeout
10 sec.*
(10-60)
Report Status
Disable*
Enable
* = Factory Default
1 = If installed
Ethernet
Hotport 1
Timeout
10 sec.*
(10-60)
Switch Out On
Data Timeout*
Session Close