Printronix H-SERIES P7000 - Manual (Page 163)

Fault Messages
163
WAITING FOR
ETHERNET ADAPTER N/A Status message: Appears
when the printer is first
powered on if the optional
Network Interface Card is
installed. No action is required.
1
Before contacting an authorized service representative, power off the printer, wait 15 seconds, then
power it back on and rerun your print job. If the message reappears, press CLEAR. If the fault message still
displays, then contact your authorized service representative.
Table 12. LCD Message Troubleshooting Table
Displayed Message
Can User
Correct?
Explanation Solution