Pentax Optio X - Manual (Page 69)

67
4
Tak
ing Pi
cture
s
4
Press the shutter release button fully.
Pictures are taken in the selected mode.
Example of picture taken in Multiple Shooting mode
Four frames are joined to form a single image.
• The flash will not discharge in Continuous Shooting mode.
• Continuous shooting is not possible in F, A, B or ^ mode.
• You can continue shooting until the memory capacity of the SD
Memory Card or built-in memory is full.
• The interval of continuous shooting will vary according to the
Recorded Pixels and Quality Level settings.
• The focus, exposure and white balance are locked with the first
image.
• In Multiple Shooting mode, recorded pixels and quality level are
[2048×1536] and [D (Better)], irrespective of settings.