Rfc 1215-trap, Bridge mib (rfc 1493) alarms, Alarm host table – Proxim AP-4000 User Manual
Page 89
Advanced Configuration
AP-4000 Series User Guide
Alarms
89
RFC 1215-Trap
Bridge MIB (RFC 1493) Alarms
All these alarm groups correspond to System Alarms that are displayed in the
, including the traps
that are sent by the AP to the SNMP managers specified in the
.
Alarm Host Table
To add an entry and enable the AP to send SNMP trap messages to a Trap Host, click Add, and then specify the IP
Address and Password for the Trap Host.
NOTE: Up to 10 entries are possible in the Alarm Host table.
• IP Address: Enter the Trap Host IP Address.
• Password: Enter the password in the Password field and the Confirm field.
• Comment: Enter an optional comment, such as the alarm (trap) host station name.
To edit or delete an entry, click Edit. Edit the information, or select Enable, Disable, or Delete from the Status
drop-down menu.
Trap Name
Description
Severity Level
coldStart
AP is on or rebooted
Informational
linkUp
AP's Ethernet interface link is up (working)
Informational
linkDown
AP's Ethernet interface link is down (not working) Informational
Trap Name
Description
Severity Level
New Root
AP has become the new root in the Spanning
Tree network
Informational
topologyChange
Trap is not sent if a newRoot trap is sent for the
same transition
Informational