Proxim AP-4000 - Manual (Page 193)

Command Line Interface (CLI) AP-4000 Series User Guide
Parameter Tables
193
802.11b Only Parameters
802.11b/g Only Parameters
Name Type Value Access CLI Parameter
Operating Frequency
Channel Integer 1 - 14; available
channels vary by
regulatory
domain/country; see
Available Channels
RW channel
Multicast Rate Integer 1 Mbits/sec (1)
2 Mbits/sec (2) (default)
5.5 Mbits/sec (3)
11 Mbits/sec (4) RW multrate
Closed Wireless System Integer enable
disable (default) RW closedsys
MAC Address PhyAddress 12 hex digits R macaddr
Supported Data Rates Octet String 1 Mbits/sec
2 Mbits/sec
5.5 Mbits/sec
11 Mbits/sec R suppdatarates
Transmit Rate Integer32 0 (auto fallback; default)
1 Mbits/sec
2 Mbits/sec
5.5 Mbits/sec
11 Mbits/sec RW txrate
Physical Layer Type Integer dsss (direct sequence
spread spectrum) for
802.11b R phytype
Regulatory Domain List DisplayString U.S./Canada -- FCC
Europe -- ETSI
Japan -- TELEC R regdomain
Name Type Value Access CLI Parameter
Wireless Operational
Mode Integer dot11b-only
dot11g-only
dot11bg (default) RW mode
Operating Frequency
Channel Integer 1 - 14; available
channels vary by
regulatory
domain/country; see
Available Channels
RW channel
Supported Data Rates Octet String See Transmit Rate ,
below
R suppdatarates