Proxy arp parameters, Ip arp filtering parameters, Broadcast filtering table – Proxim AP-4000 User Manual
Page 203: Tcp/udp port filtering, Filter
Command Line Interface (CLI)
AP-4000 Series User Guide
Parameter Tables
203
Proxy ARP Parameters
IP ARP Filtering Parameters
Broadcast Filtering Table
TCP/UDP Port Filtering
The following parameters are used to enable/disable the Port filter feature.
TCP/UDP Port Filtering Table
The following parameters are used to configure TCP/UDP Port filters.
Name
Type
Value
Access
CLI Parameter
Proxy ARP
Group
N/A
R
parp
Status
Integer
enable
disable (default)
RW
parpstatus
Name
Type
Value
Access
CLI Parameter
IP ARP Filtering
Group
N/A
R
iparp
Status
Integer
enable
disable (default)
RW
iparpfltstatus
IP Address
IpAddress
User Defined
RW
iparpfltipaddr
Subnet Mask
IpAddress
User Defined
RW
iparpfltsubmask
Name
Type
Value
Access
CLI Parameter
Broadcast Filtering Table Table
N/A
R
broadcastflttbl
Index
Integer
1 - 5
N/A
index
Protocol Name
DisplayString
N/A
R
protoname
Direction
Integer
ethertowireless
wirelesstoether
both (default)
RW
direction
Status
Integer
enable
disable (default)
RW
status
Name
Type
Value
Access
CLI Parameter
Port Filtering
Group
N/A
R
portflt
Port Filter Status
Integer
enable (default)
disable
RW
portfltstatus
Name
Type
Value
Access
CLI Parameter
Port Filtering Table
Table
N/A
R
portflttbl
Table Index
N/A
User Defined
(there are also 4
pre-defined indices, see
Port Number
below for
more information)
R
index
Port Type
Octet String
tcp
udp
tcp/udp
RW
porttype