Proxim AP-4000 User Manual
Page 179
Command Line Interface (CLI)
AP-4000 Series User Guide
Other Network Settings
179
[Device-Name]>set telifbitmask <(see below)>
Choose from the following values:
Set Communication Ports
[Device-Name]>set httpport
[Device-Name]>set telport
Configure Secure Socket Layer (HTTPS)
Enabling SSL and configuring a passphrase allows encrypted Secure Socket Layer communications to the AP through
the HTTPS interface.
[Device-Name]>set sslstatus
The user must change the SSL passphrase when uploading a new certificate/private key pair, which will have a
corresponding passphrase.
[Device-Name]>set sslpassphrase
[Device-Name]>show http (to view all HTTP configuration information including SSL.)
HTTP Group Parameters
=====================
httpifbitmask : 15
httppasswd : ********
httpport : 80
httphelplink : file:///C:/Program Files/ORiNOCO/AP4xxx/HTML/index.htm
httpsetupwiz : disable
sslstatus : enable
sslpassphrase : ********
Figure A-15 Result of “show HTTP” CLI Command
Set Telnet Session Timeouts
[Device-Name]>set tellogintout
Configure Serial Port Interface
NOTE: To avoid unexpected performance issues, leave Flow Control at the default setting (none) unless you are sure
what this setting should be.
Interface Bitmask
Description
0 or 2 = Disable (all interfaces) All management channels disabled
1 or 3 = Ethernet only
Ethernet only enabled
4 or 6 = Wireless A only
Wireless A only enabled
8 or 10 = Wireless B only
Wireless B only enabled
12 = Wireless A and Wireless B Wireless A and Wireless B enabled
13 or 15 = All interfaces
All management channels enabled