Proxim AP-4000 - Manual (Page 202)

Command Line Interface (CLI) AP-4000 Series User Guide
Parameter Tables
202
Filtering Parameters
Ethernet Protocol Filtering Parameters
Ethernet Filtering Table
Identify the different filters by using the table index.
NOTE: The filter Operation Type (passthru or block) applies only to the protocol filters that are enabled in this table.
Static MAC Address Filter Table
Name Type Value Access CLI Parameter
Ethernet Filtering Group N/A R etherflt
Filtering Interface
Bitmask Interface Bitmask 0 or 2 = No interfaces
(disable)
1 or 3 = Ethernet
4 or 6 = Wireless A
8 or 10 = Wireless B
12 = Wireless A & B
13 or 15 = All interfaces
(default is 15) RW etherfltifbitmask
Operation Type passthru
block RW etherfltoptype
Name Type Value Access CLI Parameter
Ethernet Filtering Table Table N/A R etherflttbl
Table Index N/A N/A R index
Protocol Number Octet String N/A RW protonumber
Protocol Name (optional) DisplayString RW protoname
Status (optional) Integer enable (1)
disable (2)
delete (3) RW status
Name Type Value Access CLI Parameter
Static MAC Address Filter
Table Table N/A R staticmactbl
Table Index N/A N/A R index
Static MAC Address on
Wired Network PhysAddress User Defined RW wiredmacaddr
Static MAC Address
Mask on Wired Network PhysAddress User Defined RW wiredmask
Static MAC Address on
Wireless Network PhysAddress User Defined RW wirelessmacaddr
Static MAC Address
Mask on Wireless
Network PhysAddress User Defined RW wirelessmask
Comment (optional) DisplayString max 255 characters RW cmt
Status (optional) Integer enable (default)
disable
delete RW status