Proxim AP-4000 - Manual (Page 199)

Command Line Interface (CLI) AP-4000 Series User Guide
Parameter Tables
199
HTTP Parameters
* The help link must be set to an HTTP address. Use the forward slash character ("/") rather than the backslash character ("\") when configur-
ing the Help Link location.
Telnet Parameters
Name Type Value Access CLI Parameter
HTTP Group N/A R http
HTTP Management
Interface Bitmask Interface Bitmask 0 or 2 = No interfaces
(disable)
1 or 3 = Ethernet
4 or 6 = Wireless A
8 or 10 = Wireless B
12 = Wireless A & B
13 or 15 = All interfaces
(default is 15) RW httpifbitmask
HTTP Password DisplayString User Defined (6 - 32
characters) W httppasswd
HTTP Port Integer User Defined
Default = 80 RW httpport
Help Link* DisplayString User Defined RW httphelplink
SSL Status Integer enable/disable RW sslstatus
SSL Certificate
Passphrase DisplayString User Defined W sslpassphrase
Name Type Value Access CLI Parameter
Telnet Group N/A R telnet
Telnet Management
Interface Bitmask Interface Bitmask 0 or 2 = No interfaces
(disable)
1 or 3 = Ethernet
4 or 6 = Wireless A
8 or 10 = Wireless B
12 = Wireless A & B
13 or 15 = All interfaces
(default is 15) RW telifbitmask
Telnet Port Integer User Defined
23 (default) RW telport
Telnet Login Inactivity
Time-out Integer 30 - 300 seconds
60 sec (default) RW tellogintout
Telnet Session Idle
Time-out Integer 60 - 36000 seconds
900 sec (default) RW telsessiontout