Proxim AP-4000 - Manual (Page 208)

Command Line Interface (CLI) AP-4000 Series User Guide
Parameter Tables
208
RADIUS Parameters
General RADIUS Parameters
RADIUS Server Configuration Parameters
NOTE: Use a server name only if you have enabled the DNS Client functionality. See DNS Client for RADIUS Name
Resolution .
Name Type Value Access CLI Parameter
RADIUS Group N/A R radius
Client Invalid Server
Address Counter32 N/A R radcliinvsvradd
Name Type Value Access CLI Parameter
RADIUS Authentication Table N/A R radiustbl
Table Index (Profile
Index) Integer N/A R index
Primary/Secondary Index Integer Primary (1)
Secondary (2) R subindex
Status Integer enable
disable RW status
Server Address Format Integer Ipaddr
Name RW seraddrfmt
Server IP Address or
Name IpAddress
DisplayString User defined (enter an IP
address if seraddrfmt is
ipaddr or a name if set to
name; up to 254
characters if using a
name) RW ipaddr
Port (optional) Integer User Defined
1812 (default) RW port
Shared Secret DisplayString User Defined
6 - 32 characters W ssecret
Response Time (optional) Integer 1 - 10 seconds
3 (default) RW responsetm
Maximum
Retransmissions
(optional) Integer 0 - 4
3 (default) RW maxretx
RADIUS MAC Address
Format Integer dashdelimited
colondelimited
singledashdelimited
nodelimiter RW radmacaddrformat
RADIUS Accounting
Inactivity Timer Integer32 1 - 60 minutes RW radaccinactivetmr
Authorization Lifetime Integer32 900 - 43200 seconds W radauthlifetm
RADIUS Accounting
Update Interval Integer32 10 - 3600 minutes RW radacctupdinterval
VLAN ID vlanID -1 (untagged)
1 - 4094 RW radvlanid