Proxim AP-4000 - Manual (Page 188)

Command Line Interface (CLI) AP-4000 Series User Guide
Parameter Tables
188
Network Parameters
IP Configuration Parameters
NOTE: The IP Address Assignment Type (ipaddrtype) must be set to static before the IP Address (ipaddr), IP Mask
(ipmask) or Default Gateway IP Address (ipgw) values can be entered.
DNS Client for RADIUS Name Resolution
DHCP Server Parameters
NOTE: The DHCP Server (dhcpstatus) can only be enabled after a DHCP IP Pool table entry has been created.
Name Type Value Access CLI Parameter
Network Group N/A R network
IP Configuration Group N/A R ip (Note: The network and
ip parameters display the
same information)
IP Address IpAddress User Defined RW ipaddr
IP Mask IpAddress User Defined RW ipmask
Default Router IP
Address IpAddress User Defined RW ipgw
Default TTL Integer User Defined (seconds)
0 - 255, 64 (default) RW ipttl
Address Type Integer static
dynamic (default) RW ipaddrtype
Name Type Value Access CLI Parameter
DNS Client Group N/A R dns
DNS Client status Integer enable
disable (default) RW dnsstatus
Primary DNS Server IP
Address IpAddress User Defined RW dnspridnsipaddr
Secondary DNS Server
IP Address IpAddress User Defined RW dnssecdnsipaddr
Default Domain Name Integer32 User Defined (up to 254
characters) RW dnsdomainname
Name Type Value Access CLI Parameter
DHCP Server Group N/A R dhcp
DHCP Server Status Integer enable (1) (default)
disable (2)
delete (3) RW dhcpstatus
Gateway IP Address IpAddress User Defined RW dhcpgw
Primary DNS IP Address IpAddress User Defined RW dhcppridnsipaddr
Secondary DNS IP
Address IpAddress User Defined RW dhcpsecdnsipaddr
Number of IP Pool Table
Entries Integer32 N/A R dhcpippooltblent