Proxim AP-4000 - Manual (Page 212)

Command Line Interface (CLI) AP-4000 Series User Guide
Parameter Tables
212
Enabling QoS
Configuring QoS Policies
The QoS group manages the QoS policies:
* QoS must be enabled on a wireless interface before spectralink can be enabled.
† A priority mapping needs to be specified for a QoS Policy. The priority mapping depends on the type of policy configured. For Layer 2 policy
types (inbound or outbound) a mapping index from the 802.1p to 802.1D table should be specified. For Layer 3 policy types (inbound or out-
bound) a mapping index from the IP DSCP to 802.1D table should be specified. The mapping index, in both cases, depends on the number
of mappings configured by the user. For SpectraLink policy type a mapping is not required.
Specifying the Mapping between 802.1p and 802.1D Priorities
The QoS 802.1p to 802.1D Mapping Table specifies the mapping between 802.1P and 802.1D priorities.
Name Type Value Access CLI Parameter
QoS Status Object Status enable
disable (default) RW qosstatus
QoS Maximum Medium
Threshold Integer 50 - 90 RW qosmaximummediumthresh
old
Name Type Value Access CLI Parameter
QoS Group Group N/A N/A qos
QoS Policy Table Table N/A N/A qospolicytbl
Table Primary Index Integer N/A R index
Table Secondary Index Integer N/A R secindex
Policy Name Display String 0 - 32 characters RW policyname
Policy Type Integer inlayer2,
inlayer3,
outlayer2,
outlayer3,
spectralink* RW type
Priority Mapping Index † Integer See Note † . RW mapindex
Apply QoS Marking Object Status enable
disable RW markstatus
Table Row Status Row Status enable
disable
delete RW status
Name Type Value Access CLI Parameter
QoS 802.1p to 802.1D
Mapping Table Table N/A N/A qos1pto1dtbl
Table Index (Primary
Index) Integer 0 - 7 R index
802.1D Priority
(Secondary Index) Integer 0 - 7 R 1dpriority
802.1p Priority Integer 0 - 7 RW 1ppriority
Table Row Status Row Status enable
disable
delete RW status