Laser beta lasermike LS8000-3 - Manual (Page 9)

LaserSpeed 8000-3 Instruction Handbook
Safety Information
Part No. 93463 / Drawing No. 0921-01561 Page 9 of 221 Revision A (Sep 2007)
Safety Information
• Under NO circumstances should the earth safety connections
be broken – internal damage to sensitive electronic components
may occur and at worst electrocution to personnel may result.
• This equipment must be earthed/grounded.
• Relays and associated wiring are rated for SELV levels i.e. 60
VDC & 30 VAC RMS. These levels must not be exceeded.
• Maintenance, repairs and electrical connections should be
performed by a suitably qualified person for the country of
installation.
• Input power to the equipment is of direct current type
designated by the symbol on equipment housing and shown
below.
Reference: IEC 60417-5031
• The equipment contains a slow blow type fuse to protect against
input power overloads and is not user replaceable.
Intended Use
If the equipment is used in a manner not specified by the manufacturer, the
protection provided by the equipment may be impaired.