Laser beta lasermike LS8000-3 - Manual (Page 149)

LaserSpeed 8000-3 Instruction Handbook
RS-232/RS-422 Communication
Part No. 93463 / Drawing No. 0921-01561 Page 149 of 221 Revision A (Sep 2007)
*LOCKED
Setting Lock
*LOCKED?
Read
Response Format:
*LOCKED=
*LOCKED=
Set
is either 0 or 1. This setting controls the Settings Lock. In order to prevent accidental
changes to the LS8000-3's configuration settings, you must explicitly unlock the settings
before any changes can be made.
Unlock Command: *LOCKED=0
Relock Command: *LOCKED=1
After unlocking the settings with *LOCKED=0, you can change settings. If you try to
change setting without unlocking the LS8000-3, the changes will be ignored.
The LS8000-3 will automatically re-arm the Setting Lock after 1 minute.
*LOCKEN
Setting Lock Enabled
*LOCKEN?
Read
Response Format:
*LOCKEN=
*LOCKEN=
Set
is either 0 or 1. If you are manually changing many settings over a period of time, the
Settings Lock can a become nuisance, so you may wish to disable it. Before the Settings
Lock can be disabled, however, the settings must be unlocked:
To disable Settings Lock:
*LOCKED=0
*LOCKEN=0
To re-enable Settings Lock:
*LOCKEN=1
The Settings Lock should be re-enabled after configuration is completed, and the LS8000-3
is to be placed into normal operation.