Laser beta lasermike LS8000-3 - Manual (Page 78)

LaserSpeed 8000-3 Instruction Handbook
Interfacing with the LS8000-3
Part No. 93463 / Drawing No. 0921-01561 Page 78 of 221 Revision A (Sep 2007)
Banner Retroflective Switch (Picodot)
Pinout
Signal PD45 LaserSpeed
Power (+10 v to +30v) Brown See below
Material Present White 10
Signal Ground Blue 11
Pullup (4.7K) White (LS pin 10) 24
Laser enable Grey 11
Notes:
Use with a LaserSpeed 4000-2, 8000-2, 8000-3 or 9000-3
Program the LaserSpeed for material present “external – active high”
You can power the banner switch from the LaserSpeed power supply
(pin 25) but you need to connect pins 11 and 12 on the Laserspeed
breakout together.