Laser beta lasermike LS8000-3 - Manual (Page 144)

LaserSpeed 8000-3 Instruction Handbook
RS-232/RS-422 Communication
Part No. 93463 / Drawing No. 0921-01561 Page 144 of 221 Revision A (Sep 2007)
The output will clear when the length reaches 200ft, and the Index Pulse triggers. See the
Index Pulse & Length Thresholds section for timing details.
$H
High Speed Pulse Output Configuration
$H
Read
Response Format:
$H
Set
is an integer that specifies the function of the High Speed Pulse Output. The various
outputs were described previously in the Index Pulse Output Function description.
Pulse Output Function
Value
Phase A Phase B
0 Default (High Speed Pulse Outputs)
1 System Ready Material Present
2 System Ready Valid
3 System Ready QF Pulse Output
4 System Ready QF Warning Output
5 System Ready Shutter Open
6 System Ready Laser On
7 System Ready Thermostat Output
8 Valid Thermostat Output
9 Pulse Phase A Sync Output
Note: Some of the above outputs were previously described under the Index Pulse Output
Function setting.
Sync Output
Gauge-Gauge Synchronization Output that can be connected between multiple gauges in
order to synchronize measurements. See the
Gauge-Gauge Synchronization section for
details.
L
High Speed Pulse Rate
L
Read
Response Format:
L
Set