Laser beta lasermike LS8000-3 - Manual (Page 36)

LaserSpeed 8000-3 Instruction Handbook
Interfacing with the LS8000-3
Part No. 93463 / Drawing No. 0921-01561 Page 36 of 221 Revision A (Sep 2007)
RS-232 Transmit and Receive (Pins 1-2)
The LS8000-3 has an RS-232 serial port which can be used to receive
measurement data, or to configure settings. The LS8000-3 will connect to any
DB9 RS-232 port with a straight-through cable. A null modem is not required.
Connections between the gauge and Industry standard pin outs for RS232
serial are given in the following tables:
RS-232 Serial Pinouts – LS8000-3 to Computer DB9 Connector
Gauge DB25 Pin
Number Gauge Signal
Description Computer DB9
Pin Number Computer Signal
Description
1 RS-232 Transmit 2 RS-232 Receive
2 RS-232 Receive 3 RS-232 Transmit
11, 19, or 21 Signal Ground 5 Signal Ground
RS-232 Serial Pinouts – LS8000-3 to Computer DB25 Connector
Gauge DB25
Pin Number Gauge Signal
Description Computer DB25
Pin Number Computer Signal
Description
1 RS-232 Transmit 3 RS-232 Receive
2 RS-232 Receive 2 RS-232 Transmit
11, 19, or 21 Signal Ground 7 Signal Ground
LaserTrak can be used to communicate with the LS8000-3 over the RS-232,
RS-422, and Ethernet ports. Please see the RS232/RS422 Communication
section for details on the
Communication Protocol.