Laser beta lasermike LS8000-3 - Manual (Page 128)

LaserSpeed 8000-3 Instruction Handbook
RS-232/RS-422 Communication
Part No. 93463 / Drawing No. 0921-01561 Page 128 of 221 Revision A (Sep 2007)
J
RS-232 Baud Rate & Framing
J
Read
Response Format:
J
Set
is an integer from 1-7, or 11 to 17 specifying the RS-232 baud rate and framing. If using
binary output mode (see the TB command), the framing must be set to 8n1.
Setting Baud Rate Framing
1 230.4k 7n2
2 115.2k 7n2
3 57.6k 7n2
4 38.4k 7n2
5 19.2k 7n2
6 9600 7n2
7 4800 7n2
11 230.4k 8n1
12 115.2k 8n1
13 57.6k 8n1
14 38.4k 8n1
15 19.2k 8n1
16 9600 8n1
17 4800 8n1
Where:
7n1: 7 data bits, no parity, 2 stop bits
8n1: 8 data bits, no parity, 1 stop bit
Note: After this setting is changed, the COMM LED and Valid LED will flash, indicating the
new configuration.