Scanning from a computer, Next – Kyocera FS-C1020MFP User Manual
Page 52
Top Page
>
>
Using the Machine as a Scanner
Scanning from a computer
You can operate the machine from your computer and scan originals into your computer directly.
Preparation for scanning from a computer with USB connection
1. Connect the machine to the computer using a USB cable, and install the scanner driver on the
computer.
For details, see
and Driver Installation Guide.
2. If a TWAIN-compliant application is not installed on the computer, install a TWAIN-compliant
application.
Preparation for scanning from a computer with network connection
1. Connect the machine to the network.
2. Configure the IP address, subnet mask, and gateway address using the control panel.
Configuring the IP Address Settings
.
3. Install the scanner driver on the computer.
For details, see Driver Installation Guide.
4. If a TWAIN-compliant application is not installed on the computer, install a TWAIN-compliant
application.
Copyright © 2009
Contents