Kyocera FS-C1020MFP - Manual (Page 216)

Item Setting Description
One Touch Button Optional Select when setting the destination as a Quick Dial entry.
Full Name Required
Name of the destination. The name specified here will be shown on
the screen when selecting a scan destination. Can contain up to 16
characters.
Host name or IP Address Required
Name or IP address of the FTP server. Can contain up to 32
characters.
File Format for Color/Gray Required
File format of the scanned file when scanning in color. PDF or JPEG
can be selected. PDF supports multiple pages in a document, but
JPEG does not.
File Format for B/W Required
File format of the scanned file when scanning in black and white.
PDF or TIFF can be selected. Both formats support multiple pages in
a document.
FTP User Name Optional
User name for logging in to the FTP server. Can contain up to 32
characters.
Password Optional
Password for logging in to the FTP server. Can contain up to 32
characters.
Directory Optional
Name of the FTP server directory where scanned files are stored.
Can contain up to 64 characters.
Sender Optional
E-mail address to which a notification is sent after transmission. Can
contain up to 64 characters.
Document size Optional
Select the scanning size for the original from A5, B5, A4, Executive,
STMT, Letter, Legal, or custom size.
If you select custom size, select [mm] or [inch], and then specify the
width and length.
Resolution Optional
Select the scan resolution from 100x100, 150x150, 200x200,
300x300, 400x400, or 600x600 dpi.
Density Optional
Specify the image density by clicking the right or left buttons.
is the lightest, and is the darkest.
Scan to Folder Settings