Kyocera FS-C1020MFP - Manual (Page 111)

There are three upright pins on the optional paper feed unit. Align them with the holes
on the underside of the machine, and then carefully lower the machine onto them.
After installing the option, print the configuration page to confirm the installation.
If it is installed properly, “Tray 2” will appear under “Tray Info” on the configuration page.
●
After installing the optional paper feed unit, select tray 2 in the printer driver. For details, see the printer driver Help.
●
If the optional paper feed unit is not installed properly, reinstall it following this procedure. If you cannot install it properly
even after attempting reinstallation, contact your service representative.
●
For details about printing configuration page, see Printing the Configuration Page .
●
For details about loading paper in tray 2, see Loading Paper in the Optional Paper Feed Unit .
Top Previous Next
Copyright © 2009