Specifying the tray for printing faxes, Next – Kyocera FS-C1020MFP User Manual
Page 371
Top Page
>
Configuring the Machine Using Web Browser
Configuring the Machine Settings
> Specifying the Tray for Printing Faxes
Specifying the Tray for Printing Faxes
Click the [Fax] tab on the machine settings page to specify the tray for printing faxes.
Tray Selection
Item
Description
Tray Selection
Select the tray for printing faxes from the following: Auto, Tray 1 Only, or Tray 2, Only.
If [Auto] is selected, the machine uses tray 1 and tray 2 if they contain paper of the same size.
In this case, the machine starts to print from tray 1. If tray 1 runs out of paper, the machine
automatically switches to tray 2 to continue printing. If tray 2 runs out of paper, load paper in
tray 1.
●
Only A4, Letter, or Legal size paper can be used for printing faxes. Make sure to select a tray that contains paper of the valid
size.
●
If tray 2 is not installed, only [Tray1 Only] appears.
Copyright © 2009
Contents