Kyocera FS-C1020MFP - Manual (Page 217)

Item Setting Description
One Touch Button Optional Select when setting the destination as a Quick Dial entry.
Full Name Required
Name of the destination. The name specified here will be shown on
the screen when selecting a scan destination. Can contain up to 16
characters.
Service Name Required
Path to the directory where scanned files will be stored. Consists of
the IP address or name of the destination computer, and name of
the shared folder. Can contain up to 32 characters.
Domain Optional
If the destination computer is a member of an Active Directory
domain, specify that domain name. Can contain up to 15 characters.
User Name Optional
User name for logging in to the destination computer. Can contain
up to 32 characters.
Password Optional
Password for logging in to the destination computer. Can contain up
to 32 characters.
Directory Optional
Directory within the shared folder for storing scanned files. Can
contain up to 64 characters.
File Format for Color/Gray Required
File format of the scanned file when scanning in color. PDF or JPEG
can be selected. PDF supports multiple pages in a document, but
JPEG does not.
File Format for B/W Required
File format of the scanned file when scanning in black and white.
PDF or TIFF can be selected. Both formats support multiple pages in
a document.
Document size Optional
Select the scanning size for the original from A5, B5, A4, Executive,
STMT, Letter, Legal, or custom size.
If you select custom size, select [mm] or [inch], and then specify the
width and length.
Resolution Optional
Select the scan resolution from 100x100, 150x150, 200x200,
300x300, 400x400, or 600x600 dpi.
Density Optional
Specify the image density by clicking the right or left buttons.
is the lightest, and is the darkest.