Basic operation for sending scanned files, Next – Kyocera FS-C1020MFP User Manual
Page 222

Top Page
>
>
Scanning Using the Control Panel
> Basic Operation for Sending Scanned Files
Basic Operation for Sending Scanned Files
This section describes the basic operation for scanning using the control panel. The scanned file is sent via
E-mail, to an FTP server, or a computer, depending on the specified destination.
●
The original in the ADF takes precedence over the original on the exposure glass if you place originals both in the ADF and on
the exposure glass.
Press the [Scanner] key.
Place the original on the exposure glass or in the ADF.
If necessary, configure advanced scan settings.
Press the [Address book] key.
You can press the [ ][ ] keys to scroll the address book.
Search for the desired destination by entering the destination name using the number
keys, and then press the [OK] key.
The screen changes to show the names that match the characters you enter.
Press the [B&W Start] key or the [Color Start] key.
Contents