Kyocera FS-C1020MFP User Manual

Page 420

Photocopied paper is dirty.

●

Image density is too high.
Adjust the image density. See

●

Toner on the printed surface is

not dry.
Do not touch printed surfaces

immediately after copying.

Remove freshly printed sheets

one by one, taking care not to

touch printed areas.

●

The exposure glass or ADF is

dirty. See

●

Before placing originals on the

exposure glass, make sure that

toner or correction fluid is dry.

When copying from the exposure glass, the print area of the copy is out

of alignment with the original.

Place the original copy side down,

making sure that it is aligned to the

rear left corner and pressed flat against

the exposure glass.