Next – Kyocera FS-C1020MFP User Manual

Page 48

Top Page

> Copying both sides of an ID card onto one side

of paper

Copying both sides of an ID card onto one side of paper

You can copy the front and back sides of an ID card, or other small document, onto one side of a sheet of

paper.

●

This function is only available when the original is set on the exposure glass, not when it is set in the ADF.

You can either set this machine to always make photocopies in ID card copy mode, or use this function

only when necessary.

Preparation for copying an ID card

To always make photocopies in ID card copy mode:

1. Configure the machine's default [Reduce/Enlarge] setting.

To use this function for the current job only:

1. Configure the setting using the [Reduce/Enlarge] key before starting the current job.

Contents