Kyocera FS-C1020MFP - Manual (Page 175)

Top Page > Using the Printer Function > Basic Operation in Printer Mode
Basic Operation in Printer Mode
The following procedure explains how to perform basic printing.
Open the printer properties dialog box in your document's application.
Set printing options as necessary, and then click [OK].
The printer properties dialog box closes.
Click [OK].
●
If tray 2 is installed, you can select tray 1 or 2 as the priority tray using the [Tray Priority] setting under [PDL Settings].
●
If a paper jam occurs, printing stops after the current page has been printed out. After the jammed paper is removed,
printing restarts from the jammed page automatically.
●
For details about accessing the printer properties, see Accessing the Printer Properties from an Application .
●
For details about [Tray Priority], see PDL Settings .
●
For details about how to remove the jammed paper, see Removing Printing Jams .
Related topics
If a Paper Mismatch Occurs
Canceling a Print Job
Top Previous Next
Copyright © 2009
Contents Previous Next Settings