Copy setting parameters, Next – Kyocera FS-C1020MFP User Manual
Page 301
Top Page
>
Configuring the Machine Using the Control Panel
> Copy Setting Parameters
Copy Setting Parameters
This section describes the copy setting parameters.
●
Some items might not appear, depending on the model type you are using.
Paper Select
Specifies the paper size used for printing copies.
When a tray is selected, the machine prints from that tray only.
When a paper size is selected, the machine prints from the trays that contain the paper of the
specified size, except the bypass tray. If tray 1 and tray 2 both contain the paper of the specified
size, the machine starts to print from tray 1. If tray 1 runs out of paper, the machine automatically
switches to tray 2 to continue printing. If tray 2 runs out of paper, load paper in tray 1.
If tray 2 is not installed, only [Tray1] and [Bypass Tray] appear.
Default: [Tray1]
●
Tray1
●
Tray2
●
Bypass Tray
●
A4
●
LTR
Sort
Configures the machine to sort the output pages into sets when making multiple copies of a multi-
page document (P1, P2, P1, P2...).
Default: [Off]
●
On
●
Off
Quality
Specifies the content of originals, to optimize copy quality.
Default: [Mixed]
●
Text
Select this when the original contains only text and no photographs or pictures.
●
Photo
Select this when the original contains photographs or pictures. Use this mode for the following
types of original:
❍
Photographs
❍
Pages that are entirely or mainly photographs or pictures, such as magazine pages.
●
Mixed
Select this when the original contains both text and photographs or pictures.
Density
Specifies the image density for photocopying.
Default:
●
(Lightest)
Contents