Kodak RP 30 - Manual (Page 179)

Correcting System Conditions
Special Case:
When a paper jam occurs during a system shutdown or reset, the paper jam is only
reported when the system is started again. During this time, the Info function is not
available. If the paper is not found and cannot be removed, do these steps:
1. Confirm the error message about 5 times. The main menu appears.
2. Touch i to open the Info function.
3. Touch the modules in the graphic one at a time to find the locations.
Paper Jam in the Printer Section
If a paper jam occurs in the printer section, any sheets in front of the print engine will
not be transported any further. Behind the jam position, all sheets in or behind the
print engine are automatically transported into the paper processor.
Remove sheets that are jammed in the printer. The location and the number of
sheets can be opened on the screen (touch i and touch the respective module in the
graphic).
Assembly groups that must be pulled out of the printer to remove the jam are not
energized. The printer will automatically be ready for printing again once you have
removed the jammed sheets and either cleared the error message or initiated a reset.
KODAK PROFESSIONAL RP 30 Laser Printer 7-9