Kodak RP 30 - Manual (Page 176)

Operator’s Guide
Image Processing Errors
It is possible to have several images that cannot be printed. However, only the last
image is shown.
Touch Clear.
The types of adjustment for file print are:
• Fill print
Center crop; image information getting lost.
• Fit image to paper
The complete image information is shown and a border is added.
If Fill print is selected, the aspect ratio of the frame must approximately correspond
to that of the print size. If there are larger differences, the error message Parameter
range violation appears. The image can then only be printed with Fit image to
paper.
Paper Processor Errors
Some errors cause the printer to stop. If paper is still in the transport area of the
printer, it must be removed before the work can be continued.
If an error occurs during a reset, a message appears indicating unresolved errors.
These active errors must be cleared from the error list.
1. Deactivate the option Show all errors to display only active errors.
2. Perform a reset.
7-6 KODAK PROFESSIONAL RP 30 Laser Printer