Kodak RP 30 - Manual (Page 106)

Settings
• Check PpF
If this parameter is activated a warning message will be displayed as soon as
the number of prints (PpF) entered for an order exceeds the value defined in
the Max. PpF field. Work continues as soon as the warning is confirmed. There
is no automatic correction for PpF.
• Max. PpF
Maximum number of prints per frame that will be printed without a warning
display.
• Backprint
Activation of the backprint for the File print mode. If this parameter is inactive,
no backprint can be selected for the order.
The backprint in the print mode Network order is always controlled by the
order data created at an external Workstation independent of the status of the
Backprint parameter in this menu.
• dTFS Preselection
Presetting of the use of dTFS in the File print mode. If the parameter is
activated dTFS is available for selection in the order menu, otherwise it is not
available.
KODAK PROFESSIONAL RP 30 Laser Printer 4-39