Kodak RP 30 - Manual (Page 115)

Operator’s Guide
Here is some additional information about some of the parameters.
Print date/time is printed for the formats selected under Machine settings / User
interface.
Color / density corrections prints the corrections of the correction configuration plus
the manual corrections. Because of this data in the backprint, exact reorders are
possible. The corrections are entered in the Production balance menu. Digital is
considered a basic balance for the File print mode. Since these corrections have no
effect on individual prints of the order, they are not included in the backprint.
Because there are only five positions available in the backprint for corrections,
abbreviations are necessary for the values from -9 to +9.
Correction – 9 –8 –7 –6 –5 –4 –3 –2 –1 0 +1 +2 +3 +4 +5 +6 +7 +8 +9
Backprint I H G F E D C B A N 1 2 3 4 5 6 7 8 9
The corrections are shown in sequence for:
• Color / density corrections
• Sharpness - edges
• Saturation
• Sharpness - grain
• Detail contrast
For example, "C 2 4 N 1" would indicate the following corrections:
• Color/density: –3
• Sharpness - edges: +2
• Saturation: +4
• Sharpness - grain: 0
• Detail contrast: +1
4-48 KODAK PROFESSIONAL RP 30 Laser Printer