Using a terminal application with at commands, Using a terminal, Application with at commands – Sierra Wireless RAVEN 1X 20070914 User Manual

Page 56: Choose a name and icon for your connection

Configuring your Raven

Rev 3.0B Feb.08

Using a Terminal Application
with AT Commands

You can access and configure your Raven using a terminal
application such as Microsoft HyperTerminal, PuTTY, or
similar. The following directions are for HyperTerminal which
is part of a standard installation of Windows XP.

Start > All Programs > Accessories > Communications > HyperTer‐
minal

Figure 5-13: HyperTerminal

1. Choose a name and icon for your
connection.

Choose a name for your connection, such as Raven or
Sierra Wireless AirLink Solutions. The name and icon are
only for your own reference so you can find the
connection at a later date.

Tip: If you want to have a connection saved for both local and
remote, it is recommended the connection name reflect the
connection type, i.e. Raven local.

Select OK.