Sierra Wireless RAVEN 1X 20070914 - Manual (Page 151)

Circuit Switch Communications
Rev 3.0B Feb.08 146
Figure 2-8: AceManager : Connect to Modem using PPP
6. Configure serial port speed.
a. On the left, under the GROUPS heading, select Serial.
Figure 2-9: AceManager : Serial - *MODEMHISPEED
b. Change the *MODEMHISPEED setting to “0”.
7. Save the serial setting.
a. Click the Write button on the tool bar of AceManager
and wait for the message “Write Successful” to appear
in the status bar.
Figure 2-10: AceManager : Write
b. Click the Clear button.
Figure 2-11: AceManager : Clear
c. Click the Disconnect button.