Sierra Wireless RAVEN 1X 20070914 - Manual (Page 27)

Activating your Raven on the Sprint Network
Rev 3.0B Feb.08 22
Note: You cannot activate with serial and would need USB/net to use
set up wizard.
After the Setup Wizard connects to your Raven, the details for
your specific model will be displayed. If the incorrect model is
displayed, press the Reset Button on your Raven so the Wizard
can attempt to connect again. Click Next.
Figure 3-3: Setup Wizard : Connected
3. Selecting Tasks
After the Wizard detects your Raven, you will be offered a
menu of Setup tasks. Choose the tasks you need from those
displayed.
Note: Some tasks shown in the example here might not be available
for your Raven model.
Figure 3-4: Setup Wizard : Task Menu
• Update ALEOS Firmware: Check the Sierra Wireless
server for the latest ALEOS firmware.
• Activate Modem: Configure your Raven to connect on the
Sprint network.