Activating your raven on the sprint network, Setup wizard – Sierra Wireless RAVEN 1X 20070914 User Manual
Page 25
Rev 3.0B Feb.08
20
3
3: Activating your Raven on the
Sprint Network
•
•
This chapter provides step‐by‐step directions for activating
your Raven on the Sprint cellular network.
Setup Wizard
You can find the Setup Wizard installation on the CD which
came with your Raven or on the Sierra Wireless website: http://
www.sierrawireless.com/support/AirLink/default.aspx.Use
only the Setup Wizard for Sprint for best results.
Note: The Setup Wizard
requires the Microsoft .NET
framework v. 1.1 and Microsoft
Windows 98, Windows 2000,
Windows XP, or later. You can
obtain .NET from Microsoft: http:/
/www.microsoft.com.
Note: If you are setting modem for circuit switched mode, pelase test
your connection to ensure your network account has been set up
correctly.
1. Starting the Setup Wizard
a.
Connect the Raven to your computer using a serial
cable.
b.
Connect the power adapter and antenna to your
Raven.
c.
Install the Setup Wizard by running SprintSetup‐
Wizard.exe and follow the prompts.
d.
Run the Setup Wizard from the Windows Start menu.
Start>All Programs>AirLink Communications>Setup
Wizard>Setup Wizard