Sierra Wireless RAVEN 1X 20070914 - Manual (Page 148)

Raven 1x
143 20070914
www.airlink.com/docs/AppNotes/CircuitSwitchTem‐
plates/. You should only download the template which
matches your modem model and/or configuration needs.
Information Required for CDMA/1x only
• Master Subsidy Lock (MSL) ‐ also called the Unlock Code
or Activation Code. This should be provided by your
Wireless Provider. The incorrect MSL can cause the config‐
uration to fail. This might also be programmed for you as
part of the Setup Wizard activation process.
• MIN and MDSN or MSID ‐ The phone number for your
cellular account (also called the MIN). You may have two
phone numbers for your modem, the MIN and MDN or
MSID. If you have two numbers which are different and
you only enter one, the configuration will fail. The MIN
and MDN or MSID (if it is different) should be provided
by your Wireless Provider.
• Username (SID or NID) and Password ‐ You may also
need a user name and password for your account. The user
name for your account may be the same as your MIN. The
user name and password should be provided by your
Wireless Provider.
2. Connect the modem to your computer
Using the RS232 cable, connect the modem to the computer
and apply power to the modem.
3. Erase the internal memory
The Raven should have the internal memory erased to bring
the modem to a known starting point without any configu‐
ration or account programming.
a. Start Modem Doctor.
b. Select Erase the modemʹs non‐volatile data.