Telemetry/addr list, Dbgcommlvl=n *dbgiplvl=n *dbgppplvl=n – Sierra Wireless RAVEN 1X 20070914 User Manual
Page 136
Raven 1x
131
20070914
Figure 1-14: AceManager : Logging
*DBGCOMMLVL=n
Set the logging level for the host or module COM port.
•
n=0 : No logging
•
n=1 : Host COM Port
•
n=2 : Module COM Port
*DBGIPLVL=n
Sets the logging level for the IP subsystem.
•
n=0 : No logging
•
n=1 : Log errors (i.e. invalid/corrupt packets, etc.).
•
n=2 : Log the header of all received packets. Note that this
can quickly exhaust available space for the event log.
•
n=3 : Log the header of all received and sent packets. Note
that this can quickly exhaust available space for the event
log.
*DBGPPPLVL=n
Sets the logging level for the PPP stack.
•
n=0 : No logging
•
n=1 : Log client events (default)
•
n=2 : Log server events
•
n=3 : Log client and Server events
Telemetry/Addr List
Modbus, commonly used with telemetry devices, allows a
connection via serial port to the modem. Telemetry and Addr
List commands are only used when the modem is in one of the
Modbus start‐up modes. Further, Telemetry and the Addr List
are available with all Raven line modems which have a serial
port, such as the Raven X and the Raven XT.