Sierra Wireless RAVEN 1X 20070914 - Manual (Page 129)

Configuration Commands
Rev 3.0B Feb.08 124
*SMTPSUBJ=subject
Allows configuration of the default Subject to use if one isnʹt
specified in the message by providing a “Subject: xxx” line as
the initial message line.
• subject=message subject
*SMTPUSER=user
The email account username to authenticate with the SMTP
server (*SMTPADDR) for sending email.
• user=username (maximum: 40 characters).
Note: Not required to use SMTP settings but may be required by your
cellular carrier.
Remarque :
+CMGD=n[,flag]
This command is used to delete one or several messages for C3
x11 or C3x11E only. Requires PassThru mode.
• n=0‐9 : Index number of the message (location).
• flag=0 : Delete message at location.
• flag=1 : Delete All READ messages.
• flag=2 : Delete All READ and SENT messages.
• flag=3 : Delete All READ, SENT and UNSENT messages.
• flag=4 : Delete All messages.
Caution: There is no confirmation required.
+CMGR=n
Read a message for C3x11 or C3x11E only. Requires PassThru
mode.
• n=0‐9 Index number of the message (location).
+CMGS= phone[body]
Sends an email using SMS.
The phone number is specified first. Then the body of the mes‐
sage is entered.
The message is terminated and sent by entering Ctrl‐
Z on an empty line.
• phone= phone number