Sierra Wireless RAVEN 1X 20070914 - Manual (Page 101)

Rev 3.0B Feb.08 96
A A: Configuration Commands
• Info (information)
• Status
• Common
• Logging
• Telemetry/Addr List
• 1x/EV-DO
The configuration commands (AT commands) in this chapter
are arranged according to their placement in AceManager.
The commands available in AceManager will depend of the
model number of your Raven and, in some cases, the version
of the ALEOS firmware installed.
Note: Some commands can only be configured using a terminal
emulation and typed AT commands. Some commands also require
PassThru mode.
Tip: You can use a fully qualified domain name instead of an IP
address for most configuration options calling for an IP address if your
Raven is configured to use DNS. DNS settings frequently come
directly from Sprint while your Raven is registering on the cellular
network and receiving it’s IP address.
Info (information)
The commands in the “Info” group have read‐only param‐
eters. They only provide information about the modem. Some
of the information displayed in this group does not correspond
directly to AT commands.