Sierra Wireless RAVEN 1X 20070914 - Manual (Page 107)

Configuration Commands
Rev 3.0B Feb.08 102
Common
The groups under the heading Common encompass those
commands that are common to most Sierra Wireless AirLink
modems.
Misc (Miscellaneous)
The commands of the “Misc” group are a variety of commands
that don’t directly fit in other categories.
Figure 1-3: AceManager : Misc
+++
Note: +++ is not proceeded by
AT nor does it require a carriage
return (enter). There must be an
idle time (set by S50) on the
serial port before and after this
command. AT Escape sequence. If the Raven is in a data mode (any mode
other than PassThru), this command causes the modem to re‐
enter AT command mode. The “+” is ASCII 0x2B.
+++ is not
available in AceManager.
Tip: DAE=1 disables the +++ command.
A/
Note: A/ is not proceeded by AT. Re‐execute last command. A/ is not used in AceManager.
A
Manually answer an incoming connection. A is not used in
AceManager.