Sierra Wireless RAVEN 1X 20070914 - Manual (Page 105)

Configuration Commands
Rev 3.0B Feb.08 100
+HWTEMP?
Displays the internal temperature of the radio module in
degrees Centigrade.
+PRL?
Preferred Roaming List (PRL) version.
Information Displayed in AceManager
without AT Commands Listed
• Bytes and Packets Received and Sent: Network traffic for
the applicable port.
• Number of System Resets: Counter of the number of
system resets over the life of the modem or since the
configuration was reset.
• Bad Password Count: Counter of the number of bad
password attempts.
• IP Reject Count or Log: Rejected IP Data.
• Temperature of the Internal Hardware Module: The
temperature of the internal radio module.
AT Commands Requiring PassThru mode
These commands are not displayed in AceManager.
+CBIP?
The current IP address of the modem reported by the internal
module, generally obtained from Sprint. This is the address
can contact the Raven from the Internet.
Note: If there is no current network IP address, 0.0.0.0 may be
displayed.
+CMIP
Mobile Station IP Address.
+CSQ
Received Signal Strength and Channel Frame Error Rate.
+CSSN?
Serving System.