Sierra Wireless RAVEN 1X 20070914 - Manual (Page 28)

Raven 1x
23 20070914
• Setup Data Link: Change the network parameters for your
modem, Data Link accounts ONLY. This optional step can
be done as a part of the activation process or it can be done
separately after the modem has been activated.
• Test Modem Setup: Verify your Raven is properly
configured and connecting on the Sprint network.
• Setup a DUN Connection: Create a Dial‐Up Networking
entry for local connection. This part of the setup is only
needed if you will be using your Raven to connect directly
from a computer to the Internet or other network.
Click Next when you have selected your desired options.
Note: Based on your selections, you may not need to do all of the
following Wizard steps.
4. Optional:Update ALEOS
On occasion, Sierra Wireless releases updates to the firmware
for your modem. These updates can include new features as
well as bug fixes. To make sure your modem is at optimal
performance, it is recommended to Check for Updates and
Update Now if an update is found.
Note: While checking for ALEOS Firmware updates, the Setup
Wizard uses the Internet connection on your computer to connect to
the Sierra Wireless server. Your Raven is not connected to the
wireless network for this process.
Figure 3-5: ALEOS Update
Tip: You can download current ALEOS firmware from the Sierra
Wireless web site and install it separately.