Sierra Wireless RAVEN 1X 20070914 - Manual (Page 31)

Activating your Raven on the Sprint Network
Rev 3.0B Feb.08 26
6. Vision (C3210)
The Vision configuration is required for model C3210 to
connect on the Sprint network. Other models handle this
differently in their internal hardware configuration.
a. You will need to first set up the Vision account on the
Sprint website. You will need to have Internet access,
not through the Raven, in order to complete this step.
Figure 3-9: Setup Wizard : Vision Configuration
· Follow the directions on the Wizard screen. Use the link
to go to the Sprint log‐in page and configure your
account with Sprint.
b. Network Access Identifier (NAI) ‐ The fields for NAI
and @ should be filled in for you. Verify they are
correct.
Figure 3-10: Setup Wizard : Vision - NAI
c. Enter the IP Addresses for the Home Agent and
Secondary Home Agent as provided by Sprint.