Savin C3210 - Manual (Page 92)

Color Adjustment/Program
82
3
Programs
You can store the frequently used
copy job settings in the machine
memory and recall them for future
use.
Storing a Program
Note
❒ You can store up to 10 programs.
❒ You can select the standard mode
or program No. 10 as the mode to
be set when modes are cleared or
reset, or immediately after the op-
eration switch is turned.
⇒ p.99
“Change Initial Mode”
❒ Paper settings are stored based on
paper size. So if you place more
than one paper tray of the same
size, the paper tray prioritized
with the User Tools (System Set-
tings) will be selected first.
⇒“Pa-
per Settings” General Settings
Guide
❒ Programs are not cleared by turn-
ing the power off or by pressing
the
{{{{Clear Modes}}}} key. They are
canceled only when you delete or
overwrite them with another pro-
gram.
AAAA
Edit the copy settings so that all
functions you want to store in this
program are selected.
BBBB
Press the
{{{{Program}}}} key.
CCCC
Press [Register].
DDDD
Press the program number you
want to store.
Note
❒ Program numbers with m al-
ready have settings in them.
Reference
⇒ p.83 “Changing a stored pro-
gram”
EEEE
Enter the program name with the
letter keys on the display panel.
You can enter up to 40 characters.
Reference
For details on entering charac-
ters, see “Entering Text Charac-
ters”, General Settings Guide
Note
❒ If you do not wish to enter the
program name, go to step F .
UranosC1-ENcopyA_F1_FM.book Page 82 Friday, July 26, 2002 5:01 PM