Directional size magnification (inch) – Savin C3210 User Manual
Page 48
Copying
38
2
AAAA
Press [Reduce/Enlarge].
BBBB
Press [Specifd. Ratio].
CCCC
Press [Direct. Mag.%].
To enter the ratio with the number
keys
A Press [Horizontal].
B Enter the desired ratio with the
number keys, followed by [#].
C Press [Vertical].
D Enter the desired ratio with the
number keys, followed by [#].
E Press [OK].
To specify a ratio with [
n
n
n
n] and
[
o
o
o
o]
A Press [With n
n
n
no
o
o
o].
B Press [Horizontal].
C Adjust the ratio using [n
n
n
n] or
[
o
o
o
o].
Note
❒ Pressing [n
n
n
n] or [o
o
o
o] changes
the ratio in 1% steps. Press-
ing and holding down [
n
n
n
n] or
[
o
o
o
o] changes it in 10% steps.
❒ If you have incorrectly en-
tered the ratio, readjust the
ratio with [
n
n
n
n] or [o
o
o
o].
D Press [Vertical].
E Adjust the ratio with [n
n
n
n] or
[
o
o
o
o].
F Press [OK].
DDDD
Press [OK].
EEEE
Place your originals, and then
press the
{{{{Start}}}} key.
Directional Size Magnification
(inch)
The suitable reproduction ratios will
be automatically selected when you
enter the horizontal and vertical
lengths of the original and copy im-
age you require.
1.
Horizontal original size
2.
Vertical original size
3.
Horizontal copy size
4.
Vertical copy size
Note
❒ Specify the vertical and horizontal
sizes of the original and those of
the copy, as shown in the illustra-
tion.
❒ You can enter sizes within the fol-
lowing ranges.
Metric
version
Vertical: 1 – 999mm (in 1mm
steps)
Horizontal: 1 – 9999 (in 1mm
steps)
Inch
version
0.1" – 99.9" (in 0.1" steps)
UranosC1-ENcopyA_F1_FM.book Page 38 Friday, July 26, 2002 5:01 PM