Savin C3210 - Manual (Page 100)

Troubleshooting
90
4
When Memory is Full
Note
❒ If you set "Memory Full Auto Scan Restart" of the User Tools ( ⇒ p.105 ) to
"Yes", the memory overflow message will not be displayed, but make Con-
nect Copy for the scanned originals automatically. Connect Copy continues
scanning and copying until finishing the job. Note that copy sets will be print-
ed out separately by scanning at this time.
Message Cause Solution & Reference
Memory is full. ## originals
have been scanned.
Press [Print] to copy scanned
originals.
Do not remove remaining
originals.
Note
❒ Copying will stop and this
message will be displayed
when the memory is full.
The scanned original exceeds
the number of pages that can
be stored in memory. Press [Print] to copy scanned
originals and clear the scan-
ning data. Press [Clear Memory]
to clear the scanning data and
not copy.
Press [Resume] to scan and
copy remaining originals.
[Stop] [Resume]
The machine checks if the re-
maining original should be
copied, after the scanned orig-
inal has been printed. To continue copying, remove
all copies then press [Resume].
To stop copying, press [Stop].
UranosC1-ENcopyA_F1_FM.book Page 90 Friday, July 26, 2002 5:01 PM