Savin C3210 - Manual (Page 27)

17
2. Copying
Basic Procedure
AAAA
When the machine is set for user
codes, enter a user code (up to 8
digits) with the number keys, and
then press the
{{{{#}}}} key.
The machine is ready to copy.
Reference
For Users Code, see ⇒ General
Settings Guide, “Key Operator
Tools”.
BBBB
Make sure that "Ready" is dis-
played on the screen.
If any other function is displayed,
press the
{{{{Copy}}}} key.
❖ ❖ ❖ ❖ Initial copy display
CCCC
Make sure that there are no previ-
ous settings remaining.
Note
❒ When there are previous set-
tings remaining, press the
{{{{Re-
set
}}}} key and enter again.
DDDD
Place your originals.
Reference
⇒ p.12 “Placing Originals”
EEEE
Set your desired settings.
Reference
Please refer to each functions.
FFFF
Enter the number of copies re-
quired with the number keys.
Note
❒ The maximum copy quantity
that can be set is 100.
GGGG
Press the
{{{{Start}}}} key.
The machine starts copying.
Note
❒ When you place originals on the
exposure glass, press the
{{{{#}}}}
k e y a f t e r a l l o r i g i n a l s a r e
scanned.
❒ Copies are delivered face down.
- - - -How to Operate
❖ ❖ ❖ ❖ To stop the machine during a multi-
copy run.
⇒Press the {{{{Clear/Stop}}}} key.
❖ ❖ ❖ ❖ To return the machine to the initial
condition after copying.
⇒Press the {{{{Clear Modes}}}} key.
❖ ❖ ❖ ❖ When clearing entered values.
⇒Press the {{{{Clear/Stop}}}} key or
[Clear]
on the display.
❖ ❖ ❖ ❖ To confirm the settings.
⇒Press the {{{{Check Modes}}}} key.
UranosC1-ENcopyA_F1_FM.book Page 17 Friday, July 26, 2002 5:01 PM